eSet Pro-Series Options

Kit includes 4 elbows and 4 rubber seals. Fits all JD 1790 planters with 15" or 30" row spacing. On the original JD Meter the tube on the center four rows are turned toward the back to fit under the center fill hopper. The elbow kit is what replaces that bend on the eSet meter. Improves routing of supply tube to the ProFlo hopper on the center rows of this model planter.

Kit includes flaps for 4 rows. Use on 1790 20” row planters and where eSet will be installed on 15” row units. This flap has been designed to help prevent seed from flowing out of the hopper and into the CCS hose when the wing rows are up. We recommend placing these flaps in all meters on every row of the planter.

This step kit was designed for JD 1790 planters running eSet in 20” rows. The kit replaces the original step bracket by shifting the steps out and away from the eSet ProFlow mini hoppers, preventing any contact or interference. Fits 2004+ without rear hitch (Serial #705101+); Modify to fit 2003 without rear hitch (Serial #705100+); Not needed for 24-row 20” with rear hitch.

The Stop Kit is for JD 1790 planter with configurations 12/23, 12/24, 16/31, 16/32, with short parallel arms on the 30” rows. The Stop Kit limits over extension of the parallel arms to prevent damage to the D-tube. Kit includes stops for 4 rows.

Kit includes 1 Y-tube, screen, 2 foam gaskets and rubber o-ring. The Pro-Series Y-Tube is designed for Deere Bauer planters running eSet with more than 32 rows. You will need one per row for each row over 32. For example, if you have 36 rows you will need 4 Y-Tubes. If you have 48 rows you will need 16 Y-Tubes.